This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
VOLUME PRICING - SAVE 5% WHEN YOU BUY A PALLET OF 40 CASES OF 25!
This 4ft LED T8 Universal Glass Tube is a perfect pick for any commercial or residential setting. Type A+B (Universal) LED Tubes are the easiest to use and can replace fluorescent lamps with no extra parts required for the retrofit. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
Type A+B tubes have the ability to operate off of the compatible fluorescent ballast and can also operate off line voltage as long as the fluorescent ballast is bypassed. Installation is plug & play with Type A as long as the fluorescent ballast is compatible otherwise, simply rewire the fixture to bypass the ballast for a Type B installation.
This LED Tube is configured for Double-Ended Power when used as Type B. See below for more information on Single-End Power vs Double-End power.
This LED tube is also available as a convenient 5-pack as SKU LEDT84F1000050960_C5!
This LED tube is non-dimmable!
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholders replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.
-
Warranty Information
VOLUME PRICING - SAVE 5% WHEN YOU BUY A PALLET OF 40 CASES OF 25!
This 4ft LED T8 Universal Glass Tube is a perfect pick for any commercial or residential setting. Type A+B (Universal) LED Tubes are the easiest to use and can replace fluorescent lamps with no extra parts required for the retrofit. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
Type A+B tubes have the ability to operate off of the compatible fluorescent ballast and can also operate off line voltage as long as the fluorescent ballast is bypassed. Installation is plug & play with Type A as long as the fluorescent ballast is compatible otherwise, simply rewire the fixture to bypass the ballast for a Type B installation.
This LED Tube is configured for Double-Ended Power when used as Type B. See below for more information on Single-End Power vs Double-End power.
This LED tube is also available as a convenient 5-pack as SKU LEDT84F1000050960_C5!
This LED tube is non-dimmable!
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholders replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.
