{"title":"Emergency Battery Backup","description":null,"products":[{"product_id":"emergency-led-driver-for-ufos-40w-90-min-runtime","title":"Emergency LED Driver for UFOs - 40W output - 90 Minute Backup Time","description":"\u003ch2\u003eLED Emergency Driver\u003c\/h2\u003e\r\n\r\n\u003cp\u003e40W LED Emergency Driver is designed for UFOs High Bays and is installed alongside the UFO's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires an input power of 15W and input voltage of 100-347V. It provides constant power output of 40W and output voltage of 170V DC.  It is equipped with over-voltage, short-circuit, over-load, and open-circuit protections. It is UL listed for factory and field installation as well as complies to CEC Title 20. It is also IP 65 rated meaning it is water resistant and dust-tight.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly. You can also test these remotely using a remote SKU LEDLEHD1000050402 (purchased separately).\u003c\/p\u003e\r\n\r\n\u003cp\u003eEmergency LED Driver can be installed with either chain, cable, or 1\/2\" conduit (all sold separately) from ceiling.  The LED UFO the driver will install onto can be attached to the bottom of the emergency LED driver by hook, screw, or 1\/2\" NPT (all sold separately).  The driver comes equipped with a ring hook on top and bottom.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Current:\u003c\/b\u003e ≤200mA\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 15W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 40W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 41°F to 122°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 10.77L x 5.6\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 7.27 lbs\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816374202529,"sku":"LEDLEHD1000050400","price":79.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/zj3kp9ribgwuf5fqtsqj.jpg?v=1737151952"},{"product_id":"emergency-led-driver-8w-90min-runtime-billda-2pk","title":"Case of 2 - Emergency LED Driver - 8W - 90 Minute Backup Time - BillDa","description":"\u003cp\u003eThis 8W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED tubes or any other LED luminaire 60W* or lower(*non 0-10V dimming luminaires 8W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 8W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: =100mA\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 8W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e =24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e\r\n\r\n\u003cp\u003eLooking for commercial LED Lighting?  Shop our broad selection of \u003ca href=\"https:\/\/www.lightup.com\/commercial-led-lighting.html\"\u003eCommercial LED Lighting\u003c\/a\u003e LightUp any commercial project or space!  We carry top-brands such our own high-quality \u003ca href=\"https:\/\/www.lightup.com\/lumegen.html\"\u003eLumeGen\u003c\/a\u003e brand as well as Sylvania, Euri Lighting, and more!\u003c\/p\u003e\r\n\r\n\u003cp\u003eWant to learn more about getting our products at wholesale discounts?  Buy LightUp LED Products in Bulk by completing the form on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ewholesale page\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCheck out all that LightUp has to offer on weekly specials, new products, categories, and more on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ehome page\u003c\/a\u003e!\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816374988961,"sku":"LEDLEHD1000050403-2PK","price":58.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/ebkq44zlruhcrvl0bxvl_7b579605-6339-42a1-b572-ecdbdd92a508.jpg?v=1737152003"},{"product_id":"emergency-led-driver-15w-90min-runtime-billda-4pk","title":"Case of 4 - Emergency LED Driver - 15W - 90 Minute Backup Time","description":"\u003cp\u003eThis 15W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED flat panels, LED troffers, LED tubes or any other LED luminaire 100W* or lower(*non 0-10V dimming luminaires 15W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 15W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\r\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: =100mA\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 15W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e =24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e\r\n\r\n\u003cp\u003eLooking for commercial LED Lighting?  Shop our broad selection of \u003ca href=\"https:\/\/www.lightup.com\/commercial-led-lighting.html\"\u003eCommercial LED Lighting\u003c\/a\u003e LightUp any commercial project or space!  We carry top-brands such our own high-quality \u003ca href=\"https:\/\/www.lightup.com\/lumegen.html\"\u003eLumeGen\u003c\/a\u003e brand as well as Sylvania, Euri Lighting, and more!\u003c\/p\u003e\r\n\r\n\u003cp\u003eWant to learn more about getting our products at wholesale discounts?  Buy LightUp LED Products in Bulk by completing the form on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ewholesale page\u003c\/a\u003e.\u003c\/p\u003e\r\n\r\n\u003cp\u003eCheck out all that LightUp has to offer on weekly specials, new products, categories, and more on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ehome page\u003c\/a\u003e!\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816375349409,"sku":"LEDLEHD1000050404-4PK","price":146.47,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/r2kjfysqsgpbfj6plqzo_ee71a99c-1474-4377-87ad-d75da8d1d688.jpg?v=1737152036"},{"product_id":"bld-emergency-driver-remote","title":"Remote for Emergency LED Driver for UFOs","description":"\u003cp\u003eThis remote is for use with Billda LED emergency drivers for use with UFOs. The remote allows the user to test the emergency lighting from the ground. Remote uses 2 AAA batteries (sold separately).\u003c\/p\u003e\r\n\u003cp\u003eFor use with SKUs LEDLEHD1000050400 and LEDLEHD1000050401.\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816376004769,"sku":"LEDLEHD1000050402","price":3.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/zmbkhgbekbqawccmbwey.jpg?v=1737152087"},{"product_id":"emergency-led-driver-8w-25-48v-90min-runtime-billda","title":"Emergency LED Driver - 7W Output - 25-48Vdc Output - 90 Minute Backup Time","description":"\u003cp\u003eThis 7W LED Emergency Driver is designed for 100-277V AC input LED luminaires ranging up to 20W such as linear strip lights. This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in `emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires an input power of 7W and input voltage of 100-277V. It provides constant power output of 8W and output current of 160-320mA and output voltage of 25-48Vdc. It is equipped with over-voltage, short-circuit, over-load, and open-circuit protections.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation. It is damp rated.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver includes a 2-in-1 test switch and charge indicator that can be used to test the emergency function and monitor the operation status. It includes an external lithium battery which meets 500 cycles of standard CH and standard DCH.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-277V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 25-48Vdc\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Current:\u003c\/b\u003e 160-320mA\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 7W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 8W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 104°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eDriver Dimensions:\u003c\/b\u003e 7.4\" L  x 1.5\" W x 1.14\" D\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery Pack Dimensions:\u003c\/b\u003e 4.07\" L x 1.6\" W x 1.17\" D\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816376135841,"sku":"LEDLEHD1000050407","price":16.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/iq49eu2eagn4xja88g3l.jpg?v=1737152105"},{"product_id":"emergency-led-driver-for-ufos-40w-90-min-runtime-external-driver","title":"Emergency LED Driver for UFOs - 40W output - 90 Minute Backup Time - External Driver","description":"\u003ch2\u003eLED Emergency Driver\u003c\/h2\u003e\r\n\r\n\u003cp\u003e40W LED Emergency Driver is designed for UFOs High Bays and is installed alongside the UFO's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires an input power of 15W and input voltage of 100-347V. It provides constant power output of 40W and output voltage of 170V DC.  It is equipped with over-voltage, short-circuit, over-load, and open-circuit protections. It is UL listed for factory and field installation as well as complies to CEC Title 20. It is also IP 65 rated meaning it is water resistant and dust-tight.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly. You can also test these remotely using a remote SKU LEDLEHD1000050402 (purchased separately).This emergency LED driver includes an external junction box for an external driver.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEmergency LED Driver can be installed with either chain, cable, or 1\/2\" conduit (all sold separately) from ceiling.  The LED UFO the driver will install onto can be attached to the bottom of the emergency LED driver by hook, screw, or 1\/2\" NPT (all sold separately). The driver comes equipped with a ring hook on top and bottom.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Current:\u003c\/b\u003e ≤200mA\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 15W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 40W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 41°F to 122°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 10.77\" L x 5.6\"\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 7.9 lbs\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816376397985,"sku":"LEDLEHD1000050401","price":76.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/vxgeqfivyicrv2dcyuej.jpg?v=1737152125"},{"product_id":"emergency-led-driver-15w-90min-runtime-billda","title":"Emergency LED Driver - 15W Output - 90 Minute Backup Time","description":"\u003cp\u003eThis 15W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED flat panels, LED troffers, LED tubes or any other LED luminaire 100W* or lower(*non 0-10V dimming luminaires 15W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 15W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: ≤100mA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 15W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816377020577,"sku":"LEDLEHD1000050404","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/r2kjfysqsgpbfj6plqzo_a9e087da-ab06-465e-badd-5fba9b23b095.jpg?v=1737152163"},{"product_id":"emergency-led-driver-25w-90-min-backup-billda","title":"Emergency LED Driver - 25W Output - 90 Minute Backup Time","description":"\u003cp\u003eThis 25W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED flat panels, LED troffers, LED high bays or any other LED luminaire 100W* or lower(*non 0-10V dimming luminaires 25W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 25W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\n\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: ≤100mA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 25W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816378560673,"sku":"LEDLEHD1000050405","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/ebkq44zlruhcrvl0bxvl_64a42eee-e457-4276-b154-a9514746cabd.jpg?v=1737152215"},{"product_id":"emergency-led-driver-25w-90-min-backup-billda-2pk","title":"Case of 2 - Emergency LED Driver - 25W - 90 Minute Backup Time","description":"\u003cp\u003eThis 25W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED flat panels, LED troffers, LED high bays or any other LED luminaire 100W* or lower(*non 0-10V dimming luminaires 25W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 25W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\n\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: =100mA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 25W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e =24 hours\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e\n\n\u003cp\u003eLooking for commercial LED Lighting?  Shop our broad selection of \u003ca href=\"https:\/\/www.lightup.com\/commercial-led-lighting.html\"\u003eCommercial LED Lighting\u003c\/a\u003e LightUp any commercial project or space!  We carry top-brands such our own high-quality \u003ca href=\"https:\/\/www.lightup.com\/lumegen.html\"\u003eLumeGen\u003c\/a\u003e brand as well as Sylvania, Euri Lighting, and more!\u003c\/p\u003e\n\u003cp\u003eWant to learn more about getting our products at wholesale discounts?  Buy LightUp LED Products in Bulk by completing the form on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ewholesale page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eCheck out all that LightUp has to offer on weekly specials, new products, categories, and more on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ehome page\u003c\/a\u003e!\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816379936929,"sku":"LEDLEHD1000050405-2PK","price":83.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/ebkq44zlruhcrvl0bxvl_51a67f2b-0ae8-4517-81e6-8e4c33c977a9.jpg?v=1737152301"},{"product_id":"emergency-led-driver-8w-90min-runtime-billda","title":"Emergency LED Driver - 8W Output - 90 Minute Backup Time","description":"\u003cp\u003eThis 8W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED tubes or any other LED luminaire 60W* or lower(*non 0-10V dimming luminaires 8W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 8W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\n\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: ≤100mA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 8W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816421388449,"sku":"LEDLEHD1000050403","price":93.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/ebkq44zlruhcrvl0bxvl_5e8bd05a-8130-4531-a9c9-aa3f60dce968.jpg?v=1737154224"},{"product_id":"emergency-led-driver-15w-90min-runtime-billda-2pk","title":"Case of 2 - Emergency LED Driver - 15W - 90 Minute Backup Time","description":"\u003cp\u003eThis 15W LED Emergency Driver is designed for LED commercial downlights, LED strip lights, LED flat panels, LED troffers, LED tubes or any other LED luminaire 100W* or lower(*non 0-10V dimming luminaires 15W or less). This emergency LED driver is installed alongside the luminaire's normal driver and will kick into action when the emergency driver senses a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\n\n\u003cp\u003eThis LED emergency driver requires an input power of 12W and input voltage of 100-347V. It provides constant power output of 15W and output voltage of 170V DC.  It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\n\u003cp\u003eThis emergency LED driver has built in self-diagnostic function to automatically conduct monthly 30-second and yearly 90-minute tests to ensure the backup is functioning properly.  Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Current\u003c\/b\u003e: =100mA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 15W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e =24 hours\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 32°F to 122°F\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L  x 1.9\" W x 0.94\" D\u003c\/p\u003e\n\n\u003cp\u003eLooking for commercial LED Lighting?  Shop our broad selection of \u003ca href=\"https:\/\/www.lightup.com\/commercial-led-lighting.html\"\u003eCommercial LED Lighting\u003c\/a\u003e LightUp any commercial project or space!  We carry top-brands such our own high-quality \u003ca href=\"https:\/\/www.lightup.com\/lumegen.html\"\u003eLumeGen\u003c\/a\u003e brand as well as Sylvania, Euri Lighting, and more!\u003c\/p\u003e\n\n\u003cp\u003eWant to learn more about getting our products at wholesale discounts?  Buy LightUp LED Products in Bulk by completing the form on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ewholesale page\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eCheck out all that LightUp has to offer on weekly specials, new products, categories, and more on our \u003ca href=\"https:\/\/www.lightup.com\/wholesale-led-lighting.html\"\u003ehome page\u003c\/a\u003e!\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816421519521,"sku":"LEDLEHD1000050404-2PK","price":73.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/r2kjfysqsgpbfj6plqzo_eb3e6b0e-7c08-4028-9f22-e8099d046c97.jpg?v=1737154242"},{"product_id":"emergency-led-driver-20w-170v-90-min-runtime-billda","title":"Emergency LED Driver - 20W Output - 90 Minute Backup Time","description":"\u003cp\u003eThis 20W LED Emergency Driver is designed for LED luminaires ranging up to 20W such as LED downlights or LED Tubes. This emergency LED driver is wired directly into the AC input of the LED luminaire and can provide 100% lumen output for LED lights using 20W or less in the event of a power outage. This transfer of power happens quickly enough where the lights generally don't even go out keeping the area safely lit. The primary line power supply keeps the battery charged and ready to go in the event of a power disruption. This emergency LED driver provides enough power to light the fixture to allow illuminated egress in emergency situations for up to 90 minutes when fully charged. It meets or exceeds all NEC, IBC, and Life Safety Codes for Emergency lighting requirements.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis LED emergency driver requires a max input power of 12W and input voltage of 100-347V. It provides constant power output of 20W and output voltage of 170V AC. It is UL924 listed and tested to CSA 22.2, No. 141 for factory and field installation as well as complies to CA Title 20 battery charge efficiency standards. It is damp rated.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver includes a 2-in-1 test switch and charge indicator that can be used to test the emergency function and monitor the operation status. Includes 18\" flexible metal conduit pre-attached.\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cb\u003eElectrical Specifications\u003c\/b\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Voltage:\u003c\/b\u003e 100-347V AC, 50\/60Hz\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Voltage:\u003c\/b\u003e 170V DC\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eInput Power:\u003c\/b\u003e 12W max\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eOutput Power:\u003c\/b\u003e 20W\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eEmergency Time:\u003c\/b\u003e 90 minutes\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eBattery:\u003c\/b\u003e Li-ion\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eCharging Time:\u003c\/b\u003e ≥24 hours\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eAmbient temperature:\u003c\/b\u003e 41°F to 122°F\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eWarranty:\u003c\/b\u003e 5 years\u003c\/p\u003e\r\n\u003cp\u003e\u003cb\u003eProduct Dimensions:\u003c\/b\u003e 13.78\" L x 1.9\" W x 0.94\" D\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":44816424861857,"sku":"LEDLEHD1000050406","price":39.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/q5jznodfdp4cijpwdp8v.jpg?v=1737154315"},{"product_id":"8w-emergency-led-driver-90min-backup","title":"Emergency LED Driver - 8W Output - 90 Minute Backup Time","description":"\u003cp\u003eIntroducing the 8W Emergency LED Driver, designed to deliver reliable backup power in case of power outages. Ideal for commercial and residential applications, this emergency driver provides 90 minutes of emergency runtime, ensuring your LED fixtures stay illuminated when needed most.\u003c\/p\u003e\r\n\r\n\u003cp\u003eUL Listed for safety and compliance, this driver meets stringent standards for performance and reliability. It operates on a wide input voltage range of 100–347V, making it compatible with a variety of electrical systems across North America. The stable high voltage output of 170VDC ensures seamless operation with most LED fixtures, while the energy-efficient design optimizes power usage.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith an 8W emergency power output, this driver is perfect for low to mid-power LED fixtures, ensuring sufficient illumination during outages. The compact, slim design allows for easy integration inside most LED fixtures, and the built-in test switch makes it easy to perform regular maintenance checks.\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":45920451788961,"sku":"LED_BLD-YT08D","price":93.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/LED_BLD-YT08D_-00.jpg?v=1776175476"},{"product_id":"15w-emergency-led-driver-90min-backup-ul","title":"15W Emergency LED Driver - 90-Minute Backup | UL Listed | 100-347V","description":"\u003cp\u003eThe 15W Emergency LED Driver is engineered to provide reliable backup lighting for commercial and industrial LED fixtures, ensuring continuous illumination during power outages. With a 90-minute emergency runtime, this driver meets U.S. emergency lighting code requirements, making it an essential component for safety-critical environments.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThis emergency LED driver is UL Listed, certified for safety and compliance with strict standards, making it suitable for use in commercial buildings, warehouses, parking garages, and industrial facilities. It operates across a wide voltage input range of 100–347V, ensuring compatibility with a variety of electrical systems. The high voltage output of 170VDC ensures seamless operation during emergencies.\u003c\/p\u003e\r\n\r\n\u003cp\u003eDesigned for easy installation and maintenance, the driver includes a built-in test switch for convenient system checks. With 15W constant emergency power, it supports higher wattage fixtures, ensuring optimal performance across large commercial and industrial applications. The 90-minute backup runtime guarantees compliance with safety regulations, keeping your facility illuminated and safe during power failures.\u003c\/p\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":45920452149409,"sku":"LED_BLD-HM15D","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/LED_BLD-HM15D_-00.jpg?v=1776174459"},{"product_id":"led-emergency-driver-40w-90min","title":"LED Emergency Driver 40W - 90 Minutes Backup","description":"\u003cp\u003eThe BLD-UM40D LED Emergency Driver is designed to offer reliable emergency backup power for LED lighting systems. Providing up to 90 minutes of lighting during power failures, this emergency driver ensures enhanced safety and meets compliance standards for commercial and industrial environments. Its lithium-ion battery provides long-lasting, efficient energy storage, while the stable DC output ensures consistent performance throughout the emergency period.\u003c\/p\u003e\r\n\r\n\u003cp\u003eWith a wide input voltage range (100-347VAC), the BLD-UM40D is suitable for various commercial applications, including high bays, panels, and troffers. The automatic emergency activation feature ensures that the system switches instantly during a power failure, offering uninterrupted lighting in critical situations. Ideal for warehouses, industrial facilities, office buildings, parking garages, and other facilities requiring compliant emergency lighting solutions.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003e40W Emergency Output:\u003c\/strong\u003e Provides reliable backup power for LED fixtures during outages.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003e90-Minute Emergency Operation:\u003c\/strong\u003e Meets standard emergency lighting requirements, ensuring safety in critical situations.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eWide Input Voltage (100–347VAC):\u003c\/strong\u003e Compatible with a broad range of commercial and industrial applications.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eStable DC Output (170V DC):\u003c\/strong\u003e Consistent power for uninterrupted emergency lighting.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eLi-ion Battery Powered:\u003c\/strong\u003e Offers long lifespan and efficient energy storage for extended backup time.\u003c\/li\u003e\r\n  \u003cli\u003e\n\u003cstrong\u003eAutomatic Emergency Activation:\u003c\/strong\u003e Instantly activates upon power failure, ensuring immediate lighting support.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003ch3\u003eTechnical Specifications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eModel: BLD-UM40D\u003c\/li\u003e\r\n  \u003cli\u003eInput Voltage: 100–347VAC, 50\/60Hz\u003c\/li\u003e\r\n  \u003cli\u003eInput Current: =200mA\u003c\/li\u003e\r\n  \u003cli\u003eOutput Voltage: 170V DC\u003c\/li\u003e\r\n  \u003cli\u003eOutput Power: 40W\u003c\/li\u003e\r\n  \u003cli\u003eEmergency Duration: 90 minutes\u003c\/li\u003e\r\n  \u003cli\u003eBattery Type: Lithium-ion\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003ch3\u003eApplications:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n  \u003cli\u003eWarehouses \u0026amp; industrial facilities\u003c\/li\u003e\r\n  \u003cli\u003eCommercial buildings\u003c\/li\u003e\r\n  \u003cli\u003eOffices \u0026amp; retail spaces\u003c\/li\u003e\r\n  \u003cli\u003eParking garages\u003c\/li\u003e\r\n  \u003cli\u003eSchools \u0026amp; public infrastructure\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Billda Technology","offers":[{"title":"Default Title","offer_id":45923519496353,"sku":"LED_BLD-UM40D","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0644\/0534\/0321\/files\/LED_BLD-UM40D_-00.jpg?v=1776261623"}],"url":"https:\/\/www.lightup.com\/collections\/emergency-battery-backup.oembed?page=2","provider":"LightUp","version":"1.0","type":"link"}