null Constant-Power Emergency Driver - 7.8W - 90 Minute Backup Time - LumeGen

Menu

Constant-Power Emergency Driver - 7.8W - 90 Minute Backup Time - LumeGen

Constant-Power Emergency Driver - 7.8W - 90 Minute Backup Time - LumeGen
SKU: LEDLEHD1000051405
MPN: BLEDEM-CP-1200
BRAND: LumeGen
$84.99
$68.25

(No reviews yet) Write a Review
In Stock: Ships in 5 to 7 business days
$84.99
$68.25
Case Qty 1
Clearance Non-Clearance
Country Of Origin China
Voltage AC120-277V
Warranty 5 Year
Wattage 7 W
Approvals and Listings UL Listed
Features Warranty
Recommended Uses damp_location.png
Recommended Uses ul_listed.png
Right Overlay Image 0lu-new-cat.png
Brand LumeGen
  • Details

    This Constant-Power Emergency LED Driver provides constant power output to the load during emergency mode operation. Emergency LED Drivers are required by code in certain public and commercial applications. The emergency LED driver can be operated as normally-on, normally-off, or switched load. Reference the Series System Coordination Guidelines on the spec sheet to ensure the system is installed to deliver code-compliant path of egress illumination.

    Includes charge/power "on" LED indicator light and push-to-test switch for mandated code compliance testing. The battery is a long-life, maintenance free, rechargeable NiCad battery with 24 hour maximum battery recharge time. It has surge protection per C62.41 (TVS) and input over current protection with fusible link.

    The housing is injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. Suitable for installation inside, on top, or in remote mount of the fixture. Fixture mounting plates are available and sold separately.

    This emergency backup LED driver is UL classified for factory or field installation. It is suitable for damp locations and meets UL924, NFPA 101 Life Safety code, NEC, OSHA, Local and State codes. 5 year warranty on all electronics and housing.

    Output Rating

    Current (mA) - 390-156

    Voltage (VDC) - 20-50

    Power (W) - 7.8

    Lumens - 1200

    Input Frequency (Hz) - 50-60

    Product Dimensions - 14.7" L x 2.6" W x 1.4"H

This Constant-Power Emergency LED Driver provides constant power output to the load during emergency mode operation. Emergency LED Drivers are required by code in certain public and commercial applications. The emergency LED driver can be operated as normally-on, normally-off, or switched load. Reference the Series System Coordination Guidelines on the spec sheet to ensure the system is installed to deliver code-compliant path of egress illumination.

Includes charge/power "on" LED indicator light and push-to-test switch for mandated code compliance testing. The battery is a long-life, maintenance free, rechargeable NiCad battery with 24 hour maximum battery recharge time. It has surge protection per C62.41 (TVS) and input over current protection with fusible link.

The housing is injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. Suitable for installation inside, on top, or in remote mount of the fixture. Fixture mounting plates are available and sold separately.

This emergency backup LED driver is UL classified for factory or field installation. It is suitable for damp locations and meets UL924, NFPA 101 Life Safety code, NEC, OSHA, Local and State codes. 5 year warranty on all electronics and housing.

Output Rating

Current (mA) - 390-156

Voltage (VDC) - 20-50

Power (W) - 7.8

Lumens - 1200

Input Frequency (Hz) - 50-60

Product Dimensions - 14.7" L x 2.6" W x 1.4"H

SPECIAL OFFER