This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
VOLUME PRICING - SAVE 2% WHEN YOU BUY A CASE OF 6! WHILE SUPPLIES LAST!
Replace your old energy-inefficient metal halide or CFL bulbs in your high bay fixture with an energy-efficient LED Corn Cob Retrofit Bulb. These LED retrofit bulbs will save you upwards of 65% on your energy bill by using only 100 Watts compared to 250W metal halide bulb which produces a similar amount of light. This LED retrofit bulb is designed to replace metal halide bulbs or CFLs in high bay fixtures.
At 128 lumens per watt, this 100W LED retrofit bulb produces 13,072 lumens at 5000K color temperature. It is constructed using 416 Lumileds SMD2835 LED chips. This LED retrofit delivers brightness equivalent to a 200W CFL bulb or 250W metal halide bulb.
This lamp has segmented dimming meaning there is a switch at the bottom of the bulb that allows you to select between 3 wattage (brightness) levels. This lamp switches between 100W, 80W and 63W power levels. Do not use this bulb with a dimmer!
This bulb has a E39 mogul base and is made with aluminum body and clear PC lens to provide an optimal heat sink for a long lifespan and superior illumination. It includes an internal LED driver with 6kV of surge protection. It is suitable for installation in damp locations with an IP64 rating.
This retrofit bulb is a Type B (direct wire or ballast bypass) retrofit meaning that the existing ballast of the light fixture must be removed or bypassed for proper operation of the LED retrofit. It is recommended that a licensed electrician install this LED retrofit.
This product is DLC Premium V5.0 Listed meaning it may be eligible for utility rebates. Find out more about rebates on our LED Rebates page.
Product Dimensions - 5.1" Dia x 10.3" H
Important Note - This LED retrofit is suitable for use in enclosed luminaires with minimum lamp compartment dimensions of 9.4" L x 9.4" W x 16.5" H!
Important Note - Existing fixture ballast must be removed or bypassed before installation of LED Retrofit bulb!
-
Warranty Information
VOLUME PRICING - SAVE 2% WHEN YOU BUY A CASE OF 6! WHILE SUPPLIES LAST!
Replace your old energy-inefficient metal halide or CFL bulbs in your high bay fixture with an energy-efficient LED Corn Cob Retrofit Bulb. These LED retrofit bulbs will save you upwards of 65% on your energy bill by using only 100 Watts compared to 250W metal halide bulb which produces a similar amount of light. This LED retrofit bulb is designed to replace metal halide bulbs or CFLs in high bay fixtures.
At 128 lumens per watt, this 100W LED retrofit bulb produces 13,072 lumens at 5000K color temperature. It is constructed using 416 Lumileds SMD2835 LED chips. This LED retrofit delivers brightness equivalent to a 200W CFL bulb or 250W metal halide bulb.
This lamp has segmented dimming meaning there is a switch at the bottom of the bulb that allows you to select between 3 wattage (brightness) levels. This lamp switches between 100W, 80W and 63W power levels. Do not use this bulb with a dimmer!
This bulb has a E39 mogul base and is made with aluminum body and clear PC lens to provide an optimal heat sink for a long lifespan and superior illumination. It includes an internal LED driver with 6kV of surge protection. It is suitable for installation in damp locations with an IP64 rating.
This retrofit bulb is a Type B (direct wire or ballast bypass) retrofit meaning that the existing ballast of the light fixture must be removed or bypassed for proper operation of the LED retrofit. It is recommended that a licensed electrician install this LED retrofit.
This product is DLC Premium V5.0 Listed meaning it may be eligible for utility rebates. Find out more about rebates on our LED Rebates page.
Product Dimensions - 5.1" Dia x 10.3" H
Important Note - This LED retrofit is suitable for use in enclosed luminaires with minimum lamp compartment dimensions of 9.4" L x 9.4" W x 16.5" H!
Important Note - Existing fixture ballast must be removed or bypassed before installation of LED Retrofit bulb!
