-
Details
VOLUME PRICING - SAVE 2% WHEN YOU BUY A CASE OF 6! SAVE 10% WHEN YOU BUY A PALLET OF 216! WHILE SUPPLIES LAST!
Replace your old energy-inefficient metal halide or CFL bulbs in your high bay fixture with an energy-efficient LED Corn Cob Retrofit Bulb. These LED retrofit bulbs will save you upwards of 65% on your energy bill by using only 80 Watts compared to 250W metal halide bulb which produces a similar amount of light. This LED retrofit bulb is designed to replace metal halide bulbs or CFLs in high bay fixtures.
At 128 lumens per watt, this 80W LED retrofit bulb produces 9956 lumens at 5000K color temperature. It is constructed using 350 Lumileds SMD2835 LED chips. This LED retrofit delivers brightness equivalent to a 150W CFL bulb or 250W metal halide bulb.
This lamp has segmented dimming meaning there is a switch at the bottom of the bulb that allows you to select between 3 wattage (brightness) levels. This lamp switches between 80W, 63W and 54W power levels. Do not use this bulb with a dimmer!
This bulb has a E39 mogul base and is made with aluminum body and clear PC lens to provide an optimal heat sink for a long lifespan and superior illumination. It includes an internal LED driver with 6kV of surge protection. It is suitable for installation in damp locations with an IP64 rating.
This retrofit bulb is a Type B (direct wire or ballast bypass) retrofit meaning that the existing ballast of the light fixture must be removed or bypassed for proper operation of the LED retrofit. It is recommended that a licensed electrician install this LED retrofit.
This product is DLC Premium V5.0 Listed meaning it may be eligible for utility rebates. Find out more about rebates on our LED Rebates page.
Product Dimensions - 5.1" Dia x 9.8" H
Important Note - This LED retrofit is suitable for use in enclosed luminaires with minimum lamp compartment dimensions of 9.1" L x 9.1" W x 16.5" H!
Important Note - Existing fixture ballast must be removed or bypassed before installation of LED Retrofit bulb!
-
Warranty Information
VOLUME PRICING - SAVE 2% WHEN YOU BUY A CASE OF 6! SAVE 10% WHEN YOU BUY A PALLET OF 216! WHILE SUPPLIES LAST!
Replace your old energy-inefficient metal halide or CFL bulbs in your high bay fixture with an energy-efficient LED Corn Cob Retrofit Bulb. These LED retrofit bulbs will save you upwards of 65% on your energy bill by using only 80 Watts compared to 250W metal halide bulb which produces a similar amount of light. This LED retrofit bulb is designed to replace metal halide bulbs or CFLs in high bay fixtures.
At 128 lumens per watt, this 80W LED retrofit bulb produces 9956 lumens at 5000K color temperature. It is constructed using 350 Lumileds SMD2835 LED chips. This LED retrofit delivers brightness equivalent to a 150W CFL bulb or 250W metal halide bulb.
This lamp has segmented dimming meaning there is a switch at the bottom of the bulb that allows you to select between 3 wattage (brightness) levels. This lamp switches between 80W, 63W and 54W power levels. Do not use this bulb with a dimmer!
This bulb has a E39 mogul base and is made with aluminum body and clear PC lens to provide an optimal heat sink for a long lifespan and superior illumination. It includes an internal LED driver with 6kV of surge protection. It is suitable for installation in damp locations with an IP64 rating.
This retrofit bulb is a Type B (direct wire or ballast bypass) retrofit meaning that the existing ballast of the light fixture must be removed or bypassed for proper operation of the LED retrofit. It is recommended that a licensed electrician install this LED retrofit.
This product is DLC Premium V5.0 Listed meaning it may be eligible for utility rebates. Find out more about rebates on our LED Rebates page.
Product Dimensions - 5.1" Dia x 9.8" H
Important Note - This LED retrofit is suitable for use in enclosed luminaires with minimum lamp compartment dimensions of 9.1" L x 9.1" W x 16.5" H!
Important Note - Existing fixture ballast must be removed or bypassed before installation of LED Retrofit bulb!