-
Details
This Bent Rocker and Slide Dimmer from LumeGen works with lights that require 0-10V dimming. This dimmer allows for .1 to 100% brightness. The rocker allows you to return the brightness of the load to the previous setting (pre-set Dimming Control).
This full range dimmer can be used in single pole or 3 way applications. Available in Almond and White.
This dimmer is capable at handling 6 amps at 120VAC and 3 amps at 277VAC.
To determine the amount of amperage draw from your light; divide wattage by the voltage that you are connecting to.
- Ex. Chip bought 6 LumeGen 2 x 4 60w Panels. He is connecting to 120VAC in his office.
- 60w / 120v=.5 amps per light
- 6 (lights) x .5 = 3amps draw on 120VAC
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Wall plate sold separately, see SI8831.
-
Warranty Information
-
8 Reviews
8 Reviews
-
No good
changed color in one month
-
Good switch
Works very well and priced right. Will use again.
-
great value
works well,great value.
-
Works well easy to install
Product works great. Easy to Install with pigtail wiring. Only con is length of time from order to item being shipped. Once shipped it arrived right away. Installed 2 switches for 4 lights. Dimming works great and Min max is adjustable. FYI break off tabs in centerline if installing in tandem
-
Works Great With LED Panels
Using this with 2x4 LED panels and it works great. Like it much better than the higher price models from other brands.
-
Good products, reliable
Easy to order, great products, quick delivery
-
Length of time to receive
Length of time to receive these switches. It took 6 days to go 300 miles. Job was held up waiting for these to arrive.
-
Necessary dimmer for LEDs with driver
Works good with LED 2x2 flat panels for replacing the old 4ft fluorescent fixtures. You have to send a separate wire to the LED drivers for dimming unless you get the new wireless dim controls.
-
This Bent Rocker and Slide Dimmer from LumeGen works with lights that require 0-10V dimming. This dimmer allows for .1 to 100% brightness. The rocker allows you to return the brightness of the load to the previous setting (pre-set Dimming Control).
This full range dimmer can be used in single pole or 3 way applications. Available in Almond and White.
This dimmer is capable at handling 6 amps at 120VAC and 3 amps at 277VAC.
To determine the amount of amperage draw from your light; divide wattage by the voltage that you are connecting to.
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Wall plate sold separately, see SI8831.
8 Reviews
-
No good
changed color in one month
-
Good switch
Works very well and priced right. Will use again.
-
great value
works well,great value.
-
Works well easy to install
Product works great. Easy to Install with pigtail wiring. Only con is length of time from order to item being shipped. Once shipped it arrived right away. Installed 2 switches for 4 lights. Dimming works great and Min max is adjustable. FYI break off tabs in centerline if installing in tandem
-
Works Great With LED Panels
Using this with 2x4 LED panels and it works great. Like it much better than the higher price models from other brands.
-
Good products, reliable
Easy to order, great products, quick delivery
-
Length of time to receive
Length of time to receive these switches. It took 6 days to go 300 miles. Job was held up waiting for these to arrive.
-
Necessary dimmer for LEDs with driver
Works good with LED 2x2 flat panels for replacing the old 4ft fluorescent fixtures. You have to send a separate wire to the LED drivers for dimming unless you get the new wireless dim controls.