This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
This 30W flood light from Morris is the LED replacement for a 100W metal halide light. With an IP rating of 65 (NEMA 4X), the light is dust- and water-tight. Made with corrosion-resistant die cast aluminum housing, stainless steel hardware, and a tempered glass lens. The integral cooling fin helps to maintain the LED's by efficiently releasing heat.
Operating Temperature: -40°F to 131°F
Light Pattern: Type II 120° x 90° Beam Angle
Quad Voltage (120/208/240/277V)
1/2" Knuckle Mount
Poly-carbonate Lens - Directed Optics
-
Warranty Information
This 30W flood light from Morris is the LED replacement for a 100W metal halide light. With an IP rating of 65 (NEMA 4X), the light is dust- and water-tight. Made with corrosion-resistant die cast aluminum housing, stainless steel hardware, and a tempered glass lens. The integral cooling fin helps to maintain the LED's by efficiently releasing heat.
Operating Temperature: -40°F to 131°F
Light Pattern: Type II 120° x 90° Beam Angle
Quad Voltage (120/208/240/277V)
1/2" Knuckle Mount
Poly-carbonate Lens - Directed Optics
