This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
Use to replace direct wire 18 inch fluorescent T8 tubes, the T8 LED 18 inch tube is ideal for use in homes, hotels, beauty salons, cafes, offices, academic buildings, libraries, garages, and warehouses. Available in colors 3000K (Soft White), 4000K (Bright White), 5000K (Cool White), and 6000K (Pure White), the T8 LED tube features a frosted lenses to reduce glare and turns on instantly with no flickering or delay. This is a direct wire tube, so the ballast must be removed from the existing fluorescent housing.
- Instant Savings - Reduce your energy usage and save on your electricity bill.
- Long Lasting - Keystone's T8 LED tubes have an outstanding life rating of 50,000 hours.
- High Efficiency LED - It's lumen output of 700 offers unparalleled lighting and clear visibility.
-
Warranty Information
-
10 Reviews
10 Reviews
-
Excellent results
I have an old Dazor 2134 fluorescent lamp that began showing its age. Humming and occasional flickering of the lamps. Instead of paying too much money for a new capacitor, and two magnetic ballasts I opted for these T8 - 18" LED's. The only electrical component I reused when rewiring was the switch. Now the Dazor looks the same as before but works 100% better. I am using this lamp as a task lamp (4000K) but I plan on buying softer lamps (3000K) for my office lamp which is another relic of the past. So far everything works as advertised. Very pleased.
-
Upgraded vintage drafting lamp
Reworked my second vintage Flexo Art Specialty drafting lamp to accept these LED tubes and the new light is amazing, and the silence without the humming transformers that the old fluorescents required is wonderful.
-
So far, so good.
Hard to find bulb. One did arrive broken, and they replaced it no questions asked. The broken one still worked, but it was difficult to install and I wasn't really comfortable with it. I do like the light color for under counter kitchen lights.
-
Worked great to convert an old fluorescent light
I purchased these to convert an old fluorescent fixture from the 1970s. It's been only a few weeks, but so far we are very pleased with the results!
-
Excellent customer service
I actually had to cancel this order days after the initial purchase. I just wanted to say that the customer service was friendly, helpful, and delightfully efficient. I will order from lightup.com in the future with no hesitation. -Thank you.
-
Ok but reduced size due to electronics
The bulb had adequate light output but the ends of the bulb, which provide the voltage adjustment and rectification, use up a significant portion of the lit length. Using direct wire bulbs that are externally rectified would be a better choice, if they can be found. The phosphors used produce a similar wavelength output to the older design bulbs. More modern phosphor design would help reduce the color grays. That is, wood tones and such would be enhanced.
-
fast delivery and works great
can not ask for more thanks
-
Great LED bulb
Simple and easy to follow directions. Great quality bulb. Took about ten minutes to install, and they are nice and bright. Would definitely recommend!
-
T8 LED 18" DirectDrive Tube - 7 Watts - Direct Wire - 700 Lumens - Keystone
Good LED bulb. Worked great with my existing light fixture after simple rewiring. Installed over the kitchen sink. Gives enough of warm spectrum light. I was able to modify the fixture myself with no problems. Already had a non shunted tombstone to connect the wires, used the old tombstone from the fixture, from which I pulled the wires out, for the other end, since the power is delivered only from one end.Happy with my conversion. The tube price was a bit high, but the cheaper ones were sold out and I didn't want to wait.
-
Use to replace direct wire 18 inch fluorescent T8 tubes, the T8 LED 18 inch tube is ideal for use in homes, hotels, beauty salons, cafes, offices, academic buildings, libraries, garages, and warehouses. Available in colors 3000K (Soft White), 4000K (Bright White), 5000K (Cool White), and 6000K (Pure White), the T8 LED tube features a frosted lenses to reduce glare and turns on instantly with no flickering or delay. This is a direct wire tube, so the ballast must be removed from the existing fluorescent housing.
- Instant Savings - Reduce your energy usage and save on your electricity bill.
- Long Lasting - Keystone's T8 LED tubes have an outstanding life rating of 50,000 hours.
- High Efficiency LED - It's lumen output of 700 offers unparalleled lighting and clear visibility.
10 Reviews
-
Excellent results
I have an old Dazor 2134 fluorescent lamp that began showing its age. Humming and occasional flickering of the lamps. Instead of paying too much money for a new capacitor, and two magnetic ballasts I opted for these T8 - 18" LED's. The only electrical component I reused when rewiring was the switch. Now the Dazor looks the same as before but works 100% better. I am using this lamp as a task lamp (4000K) but I plan on buying softer lamps (3000K) for my office lamp which is another relic of the past. So far everything works as advertised. Very pleased.
-
Upgraded vintage drafting lamp
Reworked my second vintage Flexo Art Specialty drafting lamp to accept these LED tubes and the new light is amazing, and the silence without the humming transformers that the old fluorescents required is wonderful.
-
So far, so good.
Hard to find bulb. One did arrive broken, and they replaced it no questions asked. The broken one still worked, but it was difficult to install and I wasn't really comfortable with it. I do like the light color for under counter kitchen lights.
-
Worked great to convert an old fluorescent light
I purchased these to convert an old fluorescent fixture from the 1970s. It's been only a few weeks, but so far we are very pleased with the results!
-
Excellent customer service
I actually had to cancel this order days after the initial purchase. I just wanted to say that the customer service was friendly, helpful, and delightfully efficient. I will order from lightup.com in the future with no hesitation. -Thank you.
-
Ok but reduced size due to electronics
The bulb had adequate light output but the ends of the bulb, which provide the voltage adjustment and rectification, use up a significant portion of the lit length. Using direct wire bulbs that are externally rectified would be a better choice, if they can be found. The phosphors used produce a similar wavelength output to the older design bulbs. More modern phosphor design would help reduce the color grays. That is, wood tones and such would be enhanced.
-
fast delivery and works great
can not ask for more thanks
-
Great LED bulb
Simple and easy to follow directions. Great quality bulb. Took about ten minutes to install, and they are nice and bright. Would definitely recommend!
-
T8 LED 18" DirectDrive Tube - 7 Watts - Direct Wire - 700 Lumens - Keystone
Good LED bulb. Worked great with my existing light fixture after simple rewiring. Installed over the kitchen sink. Gives enough of warm spectrum light. I was able to modify the fixture myself with no problems. Already had a non shunted tombstone to connect the wires, used the old tombstone from the fixture, from which I pulled the wires out, for the other end, since the power is delivered only from one end.Happy with my conversion. The tube price was a bit high, but the cheaper ones were sold out and I didn't want to wait.
