This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
A practical solution for creative merchandising and high impact illumination while maintaining a non-obtrusive appearance.
- Die cat aluminum trim, multi directional adjustable gimbal ring
- Complete with mounting hardware for use with remote transformer
- Cut hole size: 5" x 25"
- Ceiling Thickness up to 3/4"
- "Quick-install" retro-fit system allows for ease of installation in most ceilings
- Safety cables suspend the fixture allowing you to work "hands-free" during installation and servicing
- Lamps position independently on both aiming axis up to an angle of 35º
- Die cast and beveled, finishing trim for a clean architectural look
- Available for today's most effective down light lamp sources
- Not for use in insulated ceilings
- Refer to transformer instructions for recommended mounting position and branch wiring.
- Requires 6 50w T4 BA15d base Halogen bulb (not included)
Â
Height: 6"Length: 26.25"Width: 6.25"
A practical solution for creative merchandising and high impact illumination while maintaining a non-obtrusive appearance.
- Die cat aluminum trim, multi directional adjustable gimbal ring
- Complete with mounting hardware for use with remote transformer
- Cut hole size: 5" x 25"
- Ceiling Thickness up to 3/4"
- "Quick-install" retro-fit system allows for ease of installation in most ceilings
- Safety cables suspend the fixture allowing you to work "hands-free" during installation and servicing
- Lamps position independently on both aiming axis up to an angle of 35º
- Die cast and beveled, finishing trim for a clean architectural look
- Available for today's most effective down light lamp sources
- Not for use in insulated ceilings
- Refer to transformer instructions for recommended mounting position and branch wiring.
- Requires 6 50w T4 BA15d base Halogen bulb (not included)
Â
Height: 6"
Length: 26.25"
Width: 6.25"
