-
Details
This 4ft LED T8 Ballast Bypass Tube is a perfect pick for any commercial or residential setting including super markets, factories, hotels, conference rooms, schools, and offices. Type B (Bypass) LED Tubes are the easiest to use and can replace fluorescent lamps with no extra parts required for the retrofit. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
Type B tubes operate off line voltage as long as the fluorescent ballast is bypassed. Simply rewire the fixture to bypass the ballast for a Type B installation.
This LED Tube is configured for Double-Ended or Single-Ended Power . See below for more information on Single-End Power vs Double-End power.
**Note the 4000K version of this product will come in 10W instead of 9W.**
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholder replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.
-
Warranty Information
This 4ft LED T8 Ballast Bypass Tube is a perfect pick for any commercial or residential setting including super markets, factories, hotels, conference rooms, schools, and offices. Type B (Bypass) LED Tubes are the easiest to use and can replace fluorescent lamps with no extra parts required for the retrofit. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
Type B tubes operate off line voltage as long as the fluorescent ballast is bypassed. Simply rewire the fixture to bypass the ballast for a Type B installation.
This LED Tube is configured for Double-Ended or Single-Ended Power . See below for more information on Single-End Power vs Double-End power.
**Note the 4000K version of this product will come in 10W instead of 9W.**
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholder replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.