This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
Morris DC LED Array Emergency Driver provides emergency operation of DC LED arrays during loss of AC power. In the event of AC power failure, the LED arrays will operate for a minimum of 90 minutes.
Features
- Separate 9.6V, high-temperature nickel-cadmium battery packs for 20W operation
- Operates 12V to 40V LED arrays
- Switch selectable array current settings from 100 to 700 milliamps, in 50 milliamp increments
- Maintains constant LED array current during battery discharge for constant brightness
- Battery pack over-discharge protection
- Battery pack over-temperature and over-current protection
- Full battery recharge in 48 hours after complete discharge
- Charging LED indicator also provides fault codes with single and double blinks
- Universal input voltage of 120VAC – 277VAC
- UL 924 Recognized component for damp location
Morris DC LED Array Emergency Driver provides emergency operation of DC LED arrays during loss of AC power. In the event of AC power failure, the LED arrays will operate for a minimum of 90 minutes.
Features
- Separate 9.6V, high-temperature nickel-cadmium battery packs for 20W operation
- Operates 12V to 40V LED arrays
- Switch selectable array current settings from 100 to 700 milliamps, in 50 milliamp increments
- Maintains constant LED array current during battery discharge for constant brightness
- Battery pack over-discharge protection
- Battery pack over-temperature and over-current protection
- Full battery recharge in 48 hours after complete discharge
- Charging LED indicator also provides fault codes with single and double blinks
- Universal input voltage of 120VAC – 277VAC
- UL 924 Recognized component for damp location
‎
