null

Menu

Non-Shunted Short T8 Socket - Keystone

Non-Shunted Short T8 Socket - Keystone
SKU: LEDLEDH1000036791
MPN: KT-SOCKET-T8-U-S
BRAND: Keystone
$3.99
$0.76
Quantity Discounts


(6 reviews) Write a Review
In Stock

Only 3 left, order now!

$3.99
$0.76
Case Qty 1
Clearance Non-Clearance
Country Of Origin China
Lowest Bulk Price 0.66
Brand Keystone
  • Details

    This non-shunted socket from Keystone is approximately 0.9 inches. For use with direct-wire T8 LED tubes that are single end power-sourced and don't use a ballast.

  • 6 Reviews

    6 Reviews

    • 5
      helped brighten my world

      Posted by tjo on Jun 18th 2018

      Easy to follow instructions. Saves you from having to purchase whole, new, fixture to update to LED. planning on ordering more soon to finish converting all my fluorescents over to LED

    • 4
      Tube sockets for LED retrofit

      Posted by Sparky96 on Apr 21st 2018

      Has a little raised or dimpled up area that needs cut off Tiltes forward if not and doesn't have a function on my applications) in order to fit fixtures that Does have hole slot for fixtures that have screw/nut fastening attachment (1 of mine uses it) The snap in rather than slide in (can do either) simplifies insertion if/when raised area cut offI modified (2 different fixtures). Push in connection is ok and accessible after inserted into bracket.

    • 5
      Incorrect part shipped?

      Posted by Steve on Feb 8th 2018

      I ordered the short non- shunted socket which is advertised as being 0.9 inches long. The sockets I received were 1.25 inches long. The troffers have a ridge behind the sockets so they did not sit flush because the sockets were too long. Made for a tight fit for the LED lights.

    • 5
      Perfect fit & excellent price

      Posted by cs101 on Oct 14th 2017

      Perfect fit & excellent price for retrofitting our 2' fixtures. Be careful in determining whether you need the tall or short sockets.

    • 5
      review10

      Posted by Mark on Sep 6th 2017

      I replaced some T-8 bulbs with LED bulbs and had to replace the shunts with these non-ballasted shunts. I called tech support to make sure these were UL approved and was told they were. Tech support was very helpful in finding out for me. These shunts fit perfectly in my old fixtures, would use them again if needed

    • 4
      didnt fit

      Posted by Isaac on Mar 29th 2017

      these sockets didn't fit my lithonia 449311 t8 fixtures :( The mounting foot is too thin (approx 1/16 inch ) were mine are around 1/4 inch. I didnt catch that they were short too. measured 11/2 tall compared to my originals at 13/4. I plan to only replace the powered end socket so they wouldn't sit level if i used these. other than that these would probly work fine in the right application.

This non-shunted socket from Keystone is approximately 0.9 inches. For use with direct-wire T8 LED tubes that are single end power-sourced and don't use a ballast.

6 Reviews

  • 5
    helped brighten my world

    Posted by tjo on Jun 18th 2018

    Easy to follow instructions. Saves you from having to purchase whole, new, fixture to update to LED. planning on ordering more soon to finish converting all my fluorescents over to LED

  • 4
    Tube sockets for LED retrofit

    Posted by Sparky96 on Apr 21st 2018

    Has a little raised or dimpled up area that needs cut off Tiltes forward if not and doesn't have a function on my applications) in order to fit fixtures that Does have hole slot for fixtures that have screw/nut fastening attachment (1 of mine uses it) The snap in rather than slide in (can do either) simplifies insertion if/when raised area cut offI modified (2 different fixtures). Push in connection is ok and accessible after inserted into bracket.

  • 5
    Incorrect part shipped?

    Posted by Steve on Feb 8th 2018

    I ordered the short non- shunted socket which is advertised as being 0.9 inches long. The sockets I received were 1.25 inches long. The troffers have a ridge behind the sockets so they did not sit flush because the sockets were too long. Made for a tight fit for the LED lights.

  • 5
    Perfect fit & excellent price

    Posted by cs101 on Oct 14th 2017

    Perfect fit & excellent price for retrofitting our 2' fixtures. Be careful in determining whether you need the tall or short sockets.

  • 5
    review10

    Posted by Mark on Sep 6th 2017

    I replaced some T-8 bulbs with LED bulbs and had to replace the shunts with these non-ballasted shunts. I called tech support to make sure these were UL approved and was told they were. Tech support was very helpful in finding out for me. These shunts fit perfectly in my old fixtures, would use them again if needed

  • 4
    didnt fit

    Posted by Isaac on Mar 29th 2017

    these sockets didn't fit my lithonia 449311 t8 fixtures :( The mounting foot is too thin (approx 1/16 inch ) were mine are around 1/4 inch. I didnt catch that they were short too. measured 11/2 tall compared to my originals at 13/4. I plan to only replace the powered end socket so they wouldn't sit level if i used these. other than that these would probly work fine in the right application.

SPECIAL OFFER