This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
This 4ft LED T8 Direct Wire Tube is a perfect pick for any commercial or residential setting. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
This LED Tube is configured for Single-Ended Power, meaning this tube has a live pin and a neutral pin on the same end. For fluorescent retrofits, you must replace one of the shunted lampholders (or tombstones) on the fluorescent fixture with a non-shunted socket. See below for more information on Single-End Power vs Double-End power.
This LED tube is DLC V5 rated and may be eligible for additional utility rebates in certain areas. Check out our Rebate Assistant tool to find if this product qualifies for you!
Existing fluorescent ballast must be bypassed for proper operation!
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholders replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.
-
Warranty Information
This 4ft LED T8 Direct Wire Tube is a perfect pick for any commercial or residential setting. LED Tubes are more energy efficient and longer lasting than fluorescent tubes and contain no hazardous materials!
This LED Tube is configured for Single-Ended Power, meaning this tube has a live pin and a neutral pin on the same end. For fluorescent retrofits, you must replace one of the shunted lampholders (or tombstones) on the fluorescent fixture with a non-shunted socket. See below for more information on Single-End Power vs Double-End power.
This LED tube is DLC V5 rated and may be eligible for additional utility rebates in certain areas. Check out our Rebate Assistant tool to find if this product qualifies for you!
Existing fluorescent ballast must be bypassed for proper operation!
What is the difference between Single Ended vs. Double Ended Power?
Single Ended
Single Ended Power tubes are LED lamps that have neutral and live pins on the same side.
If the lamp is being installed as a retrofit into a fluorescent fixture, one of the shunted lampholders (or tombstones)on the fluorescent fixture will need to be replaced with a non-shunted lampholder. Shop Non-Shunted Sockets
Single Ended lamps installed by Direct Wire application do not need a ballast. If installing as a retrofit in a fluorescent fixture, the ballast will need to be removed and the lampholders replaced.
Double Ended
Doubled Ended Power tubes are LED lamps that have separate live and neutral ends.
These type of tubes can use both Non-Shunted Sockets and Shunted Sockets.
