-
Constant-Power Emergency LED Driver - 15W - 90 Minute Backup Time
SKU: LEDLHED1000050365
MPN: EMA15YY-ZZZ- Brand: Helpower
- Warranty: 5 Year
- Wattage: 15 W
- Features: Warranty, Damp Rated,
-
Emergency LED Driver for UFOs - 40W output - 90 Minute Backup Time
SKU: LEDLEHD1000050400
MPN: BLD-RM40R-YYY- Brand: Billda Technology
- Warranty: 5 Year
- Wattage: 15W
- Features: Warranty,
-
Emergency LED Driver for UFOs - 40W output - 90 Minute Backup Time - External Driver
SKU: LEDLEHD1000050401
MPN: BLD-UM40R-YYY- Brand: Billda Technology
- Warranty: 5 Year
- Wattage: 15W
- Features: Warranty,
-
Emergency LED Driver - 25W Output - 90 Minute Backup Time
SKU: LEDLEHD1000050405
MPN: BLD-HM25D-YYY- Brand: Billda Technology
- Warranty: 5 Year
- Wattage: Input 12W | Output 25W
- Features: Warranty,
-
Emergency LED Driver for 120V AC Luminaires - 20W Output - 90 Minute Backup Time
SKU: LEDLEHD1000050406
MPN: BLD-HM20D-120- Brand: Billda Technology
- Warranty: 5 Year
- Wattage: Input 7W | Output 20W
- Features: Warranty,
-
Emergency LED Driver - 8W Output - 90 Minute Backup Time
SKU: LEDLEHD1000050403
MPN: BLD-HM08D-YYY- Brand: Billda Technology
- Warranty: 5 Year
- Features: Warranty,
-
Emergency LED Driver - 8W Output - 90 Minute Backup Time - JN
SKU: LEDLEHD1000050415
MPN: EMH-08170-HY- Brand: JN
- Warranty: 5 Year
- Features: Warranty,
-
Emergency LED Driver for UFO High Bay - 30W Output - Venas
SKU: LEDLHMS1000051345
MPN: BLD-RM30WD-YYY-30W Battery back up for UFO D/C/E- Brand: Venas
- Warranty: 5 Year
- Features: IP65,
-
Constant-Power Emergency LED Driver - 17W Output - 90 Minute Backup Time - Title 20 Complaint - LumeGen
SKU: LEDLEHD1000051412
MPN: BLEDEM-CP-2400-CEC- Brand: LumeGen
- Warranty: 5 Year
- Wattage: 17 W
- Features: Warranty,
-
Programmed Start Electronic Ballasts, 120-277 volts, 50/60hz, 2Lamp
SKU: LEDIGNT1000010100
MPN: GE232-MVPS-L- Brand: GE Lighting VOLUME PRICING - SAVE 16% WHEN YOU BUY A PALLET OF 80! GE 96720 GE232-MVPS-L 120/277-volt Ultra Start Electronic Fluorescent T8 Programmed Rapid Start Ballast, 2 or 1 F32T8 lamps. Programmed Rapid Start T8 Ballast will accept up to 2 or 1 F32T8 lamps... Read More
$5.95As low as: $ 5.00View Item for Programmed Start Electronic Ballasts, 120-277 volts, 50/60hz, 2Lamp -
E26 Socket - LumeGen
SKU: LEDSCKT1000051619
MPN: LG-E26-A- Brand: BESTWON This is an E26 Medium Base hard wire socket with hanging hook. Perfect to easily add screw-in socket where light is needed. Works especially well with our LED adjustable panels bulbs with E26 base. Shop our LED Adjustable Panel Bulbs to find... Read More
-
LED Driver - 120/277V - Non-Dimmable -mA350 Output - Lighttech Driver
SKU: LEDIGNT1000099998
MPN: GELD18DMV350BF- Brand: GE Lighting VOLUME PRICING - SAVE 5% WHEN YOU BUY A CASE OF 24! SAVE 50% WHEN YOU BUY A PALLET OF 1500! WHILE SUPPLIES LAST!</ 18W DC 350mA constant current LED driver. From 4 to 12 LEDs in series. Aluminum Casing. Potted. Bottom Feed. USA version Current:... Read More
$2.00As low as: $ 1.00View Item for LED Driver - 120/277V - Non-Dimmable -mA350 Output - Lighttech Driver -
Microwave Highbay Sensor - 12VDC
SKU: LEDLHMS1000051849
MPN: HD07VR-MH- Brand: Jen Lighting Corp.
- Features: IP65,
-
Emergency LED Driver - 20W Output - Morris
SKU: LEDBLST1000050822
MPN: 72917- Brand: Morris Morris DC LED Array Emergency Driver provides emergency operation of DC LED arrays during loss of AC power. In the event of AC power failure, the LED arrays will operate for a minimum of 90 minutes. Features Separate 9.6V, high-temperature... Read More
-
LED Flat Panel or Troffer Add-on 12VDC Motion Sensor - LumeGen
SKU: LEDFPMS1000050523
MPN: US002-01VR-1- Brand: LumeGen
- Warranty: 5 Year
- Features: IP65,
-
Microwave Motion Sensor for UFO High Bay -LumeGen
SKU: LEDLHMS1000051327
MPN: UFO Motion Sensor- Brand: LumeGen
- Features: IP65,

Electrical
Dimmers can be used to dim the brightness of any LED fixture that allows dimming, taking the brightness down to 10 percent of its normal output.
Occupancy Sensors are great for turning on lights just by walking into a room or area without having to find a wall switch. They can also feature humidity control along with motion control, making these particular models great for bathrooms, laundry rooms, and basements.
Receptacles are used as a safe power source in your home, office, or job site and certain ones can also include USB plugs on them to charge your mobile device or tablet.
Wall Plates cover the receptacle or dimmer switch, usually matching in color to provide a clean and visually appealing look of the devices.
0-10v Dimmers are used specifically for devices that require a control voltage of 0-10V for dimming, which normally include high bays, troffers, and panels.
All of these devices are ideal for use in any room or area that needs to have outlets or dimming capability for the lights, including garages, bedrooms, offices, hallways, warehouses, and more!
New to LED lighting terminology? Check out our Glossary of Terms