The 1 Gang Screwless Wall Plate from Enerlites mounts flush to the wall without screws for an easy installation that looks great. This product mounts using clips. Compatible with traditional dimmers, switches and accessories. Available in Almond, Black,... Read More
This daylight sensor dims and illuminates in accordance to present natural light. When bright daylight is shining in the room, the sensor lowers its light level. It provides a simple and effective solution for daylight harvesting. When there is little or... Read More
This 150W Maestro Tap and Rocker Switch from Lutron works with CFL/LED bulbs, as well as all incandescent and halogen bulbs. This dimmer can be used in single pole or 3 way applications. Works with 150W CFL/LED bulbs or 600W incandescent and halogen... Read More
18W DC 700mA constant current LED driver. From 4 to 12 LEDs in series. Aluminum Casing. Potted. Bottom Feed. USA version Current: DC Dimmable with Trailing Edge dimmers Designed for IP67 Reinforced insulation from input to output High efficiency PFC:... Read More
The Infusion™ DLM (Down Light Module) series is the ideal ambient lighting solution for high-end retail, commercial office, and hospitality applications. Infusion DLM features outstanding efficacy and color rendering across the entire series, and... Read More
The 3 Gang Plastic Decorator Wall Plate from Enerlites mounts flush to the wall and screws in for an easy installation that looks great. Compatible with traditional dimmers, switches and accessories. Available in Almond, Black, Ivory, Light Almond, and... Read More
This constant voltage emergency backup driver provides a 90-minute minimum of 12 Watts of LED power. Equipped with short circuit overload and open load protection. Rated for use in dry and damp locations, indoors and outdoors. Driver has a test switch... Read More
GE Lighting’s range of Infusion LED modules has provided the lighting industry with a game-changing platform, opening up new
possibilities for the use of long-lasting, controllable, low maintenance LED solutions where the quality of light is critical to... Read More
An LED driver's main purpose is to rectify higher voltage, alternating current to low voltage, direct current. LED drivers also protect LEDs from voltage or current fluctuations. A change in voltage could cause a change in the current being supplied to... Read More
Lamp type Fluorescent - Electronic Ballast Type Program / Rapid Start Parallel lamp operation means system maintenance is easier to manage Multi-Voltage Technology handles voltage from 120 to 277V Anti-striation circuitry reduces striations with... Read More
The 3 Gang Screwless Wall Plate from Enerlites mounts flush to the wall without screws for an easy installation that looks great. Compatible with traditional dimmers, switches and accessories. Available in Almond, Black, Ivory, Light Almond, and White... Read More
This PIR Occupancy/Vacancy Residential and Commercial Sensor has interchangeable face plates and its two different modes save you money by turning off lights when no motion is detected in an area. The 3 wire occupancy sensor is best when neutral wire is... Read More
This Mini Paddle and Slide Dimmer from Enerlites is ideal for use with 150W CFL/LED bulbs, but is also compatible with 700W incandescent and halogen bulbs. The smart on/off paddle remembers most recent dimmed settings and adjusts the light to that... Read More
36W DC 700mA constant current LED driver. From 4 to 12 LEDs in series. Aluminum Casing. Potted. Bottom Feed. USA version Current: DC Dimmable with Trailing Edge dimmers Designed for IP67 Reinforced insulation from input to output High efficiency PFC:... Read More
The 1 Gang Plastic Toggle Wall Plate from Enerlites mounts flush to the wall and screws in for an easy installation that looks great. Compatible with traditional dimmers, switches and accessories. Available in Almond, Black, Ivory, Light Almond, and... Read More
Lightec LED Driver, Suitable For Use With: LED Tube, 120 - 277 volt, 45 watt, 50/60 Hz Brand: GE Lighting LED Driver 0-10V Dimming Suitable for use with LED Tube 45W 120/277V Read More
Dimmers can be used to dim the brightness of any LED fixture that allows dimming, taking the brightness down to 10 percent of its normal output.
Occupancy Sensors are great for turning on lights just by walking into a room or area without having to find a wall switch. They can also feature humidity control along with motion control, making these particular models great for bathrooms, laundry rooms, and basements.
Receptacles are used as a safe power source in your home, office, or job site and certain ones can also include USB plugs on them to charge your mobile device or tablet.
Wall Plates cover the receptacle or dimmer switch, usually matching in color to provide a clean and visually appealing look of the devices.
0-10v Dimmers are used specifically for devices that require a control voltage of 0-10V for dimming, which normally include high bays, troffers, and panels.
All of these devices are ideal for use in any room or area that needs to have outlets or dimming capability for the lights, including garages, bedrooms, offices, hallways, warehouses, and more!
