Electrical
-
SKU:
LEDIGNT1000010118
MPN: LED21T8/DR/VLC21
- Brand: GE Lighting
Lightec LED Driver, Suitable For Use With: LED Tube, 120 - 277 volt, 45 watt, 50/60 Hz Brand: GE Lighting LED Driver 0-10V Dimming Suitable for use with LED Tube 45W 120/277V Read More
-
SKU:
LEDIGNT1000099998
MPN: geld18dmv350bf
- Brand: GE Lighting
 18W DC 700mA constant current LED driver. From 4 to 12 LEDs in series. Aluminum Casing. Potted. Bottom Feed. USA version Current: DC Dimmable with Trailing Edge dimmers Designed for IP67 Reinforced insulation from input to output High efficiency PFC:... Read More
$29.99
$3.95
As low as:
$
3.56
View Item
-
SKU:
LEDBLST1000050822
MPN: 72917
- Brand: GE Lighting
This Emergency Backup LED Ballast provides emergency operation of 12
to 40 volt LED arrays for 90 minutes
This ballasts maintains constant LED array current during battery discharge for a constant brightness The universal input voltage ranges from... Read More
-
SKU:
LEDIGNT1000010059
MPN: GE132-MVPS-L
- Brand: GE Lighting
GE LFL UltraStart® Electronic Program / Rapid Start Ballast  A new generation of ultra-efficient Programmed Start ballasts (> 90% efficiency). Extends lamp life in frequently switched applications (> 100,000 on/off cycles) Multi-Voltage... Read More
-
SKU:
LEDCNPY1000050107
MPN: GARAG1A/CONN/1/SV
- Brand: Sylvania
Wire through conduit connection for Sylvania LED Garage Lights.Brand: Sylvania
1 Unit Read More
-
SKU:
LEDCNPY1000050108
MPN: GARAG1A/CONN/2/SV
- Brand: Sylvania
Wire through conduit connection for Sylvania LED Garage Lights.Brand: Sylvania
2 UnitS Read More
-
SKU:
LEDIGNT1000010137
MPN: WG-FBX-2N
- Brand: Philips
FBX SeriesWire guard for 16,000, 20,000, and 24,000 lumen versions Brand: Philips Wire guard for 16,000, 20,000, and 24,000 lumen versions Read More
-
SKU:
LEDIGNT1000010164
MPN: psd-48-24-277
- Brand: Luminii
The PSD series of LED power supplies are specifically designed to work with linear LED strip lights or modules. They feature aluminum heat dissipating housing, seamless forward phase dimming, and indoor / outdoor enclosure. Class 2 wiring. UL listed  ... Read More
-
SKU:
LEDLHLS1000037737
MPN: MS01
- Brand: LumeGen
- Warranty: 5 Year
This daylight sensor dims and illuminates in accordance to present natural light. When bright daylight is shining in the room, the sensor lowers its light level. It provides a simple and effective solution for daylight harvesting. When there is little or... Read More
-
SKU:
LEDLHLS1000050184
MPN: BRI823
- Brand: LumeGen
- Warranty: 5 Year
This is a Bi-level PIR Sensor designed to fit Parking Garage Canopy Lights - Mester & some area lights.
Use with models:
MCP0560W27V50KD
MCP0330W27V50KWDPG
MCP0345W27V50KWDPG
MCP0360W27V50KWDPG
Brand: LumeGen5 Year Warranty Read More
-
SKU:
LEDIGNT1000010123
MPN: GEO150?1050MV-GL
- Brand: GE Lighting
Dimming circuit is classified as Class 2 as stipulated in UL1310. Minimum ambient operating temperature: -40°C Maximum allowable case temperature: 80°C. For reliability and failure rate information, contact GE Technical Sales Representative. Output... Read More
-
SKU:
LEDLHED1000038124
MPN: KT-EMRG-LED-5-500-K1-IP
- Brand: Keystone
- Warranty: 5 Year
This constant voltage emergency backup driver provides a 90-minute minimum of 5 Watts of LED power. Equipped with short circuit overload and open load protection. Rated for use in dry and damp locations, indoors and outdoors. Driver has a test switch and... Read More
$276.92
$138.46
View Item
These LED Lighting Controls include LED dimmers, receptacles for outlets, wall plates, occupancy sensors and 0-10v dimmers for specific LED applications. Dimmers can be used to dim the brightness of any LED fixture that allows dimming, taking the brightness down to 10 percent of its normal output.
Occupancy Sensors are great for turning on lights just by walking into a room or area without having to find a wall switch. They can also feature humidity control along with motion control, making these particular models great for bathrooms, laundry rooms, and basements.
Receptacles are used as a safe power source in your home, office, or job site and certain ones can also include USB plugs on them to charge your mobile device or tablet.
Wall Plates cover the receptacle or dimmer switch, usually matching in color to provide a clean and visually appealing look of the devices.
0-10v Dimmers are used specifically for devices that require a control voltage of 0-10V for dimming, which normally include high bays, troffers, and panels.
All of these devices are ideal for use in any room or area that needs to have outlets or dimming capability for the lights, including garages, bedrooms, offices, hallways, warehouses, and more!
New to LED lighting terminology? Check out our Glossary of Terms
