null

Menu

Non-Shunted Tall T8 Socket - Keystone

Non-Shunted Tall T8 Socket - Keystone
SKU: LEDLEDH1000036790
MPN: KT-SOCKET-T8-U-T
BRAND: Keystone
$3.99
$0.76
Quantity Discounts


(13 reviews) Write a Review
In Stock
$3.99
$0.76
Case Qty 1
Clearance Non-Clearance
Country Of Origin China
Lowest Bulk Price 0.66
Brand Keystone
  • Details

    This non-shunted socket from Keystone is approximately 1.18 inches. For use with direct-wire T8 LED tubes that are single end power-sourced and don't use a ballast.

  • 13 Reviews

    13 Reviews

    • 5
      Good value

      Posted by rlg on Oct 20th 2018

      easy to install

    • 5
      Simple to use

      Posted by crazypere on Jun 2nd 2018

      Easy to wire and simple to install in place of the shunted sockets

    • 5
      Insurance

      Posted by Gary on Apr 17th 2018

      Bought T8 sockets (tombstones) to change over 4 ft CFL lamps to LED's ... really didn't need them , because all the sockets I had were non-shunted. But I have them for any future need , and cheap too !!!

    • 4
      Good price; does the job

      Posted by Jack on Feb 7th 2018

      I used a couple to replace broken tombstones in an older fixture that I was retrofitting for LED tubes. It slipped right into the fixture and worked perfectly. It's not as robust as the ones that I replaced, but that may be the case with anything made today. Perfectly adequate for an LED installation where tube replacement should be infrequent.

    • 5
      Excellent

      Posted by Larry on Jan 27th 2018

      Excellent product that makes it super easy to convert florescent tubes to LED.

    • 5
      good socket

      Posted by Jack on Dec 29th 2017

      Only used 2 of these to replace broken sockets. The rest had one end that was non-shunted, so used that end to apply 120 VAC. The other end is just a tube support.

    • 5
      It did the job at a nice price

      Posted by Jon on Dec 1st 2017

      I am not an electrician so this was my second purchase and this one worked. It clicked right into place and worked just fine. I wish it were a 4mm taller to match the other end exactly, but over 4 feet it is not noticeable and works fine. Thanks

    • 5
      Led Tube Socket

      Posted by Gary P on Nov 27th 2017

      I ordered these sockets along with some led tubes in case I couldn't modify the existing sockets in my fixtures. The quality seems about standard to those purchased elsewhere. I have no way to compare them. I did use one to test my led tubes I purchased and the sockets worked smooth. They should work well.

    • 5
      Excellent product

      Posted by Tomgonzo on Sep 20th 2017

      Easy to install. Great price

This non-shunted socket from Keystone is approximately 1.18 inches. For use with direct-wire T8 LED tubes that are single end power-sourced and don't use a ballast.

13 Reviews

  • 5
    Good value

    Posted by rlg on Oct 20th 2018

    easy to install

  • 5
    Simple to use

    Posted by crazypere on Jun 2nd 2018

    Easy to wire and simple to install in place of the shunted sockets

  • 5
    Insurance

    Posted by Gary on Apr 17th 2018

    Bought T8 sockets (tombstones) to change over 4 ft CFL lamps to LED's ... really didn't need them , because all the sockets I had were non-shunted. But I have them for any future need , and cheap too !!!

  • 4
    Good price; does the job

    Posted by Jack on Feb 7th 2018

    I used a couple to replace broken tombstones in an older fixture that I was retrofitting for LED tubes. It slipped right into the fixture and worked perfectly. It's not as robust as the ones that I replaced, but that may be the case with anything made today. Perfectly adequate for an LED installation where tube replacement should be infrequent.

  • 5
    Excellent

    Posted by Larry on Jan 27th 2018

    Excellent product that makes it super easy to convert florescent tubes to LED.

  • 5
    good socket

    Posted by Jack on Dec 29th 2017

    Only used 2 of these to replace broken sockets. The rest had one end that was non-shunted, so used that end to apply 120 VAC. The other end is just a tube support.

  • 5
    It did the job at a nice price

    Posted by Jon on Dec 1st 2017

    I am not an electrician so this was my second purchase and this one worked. It clicked right into place and worked just fine. I wish it were a 4mm taller to match the other end exactly, but over 4 feet it is not noticeable and works fine. Thanks

  • 5
    Led Tube Socket

    Posted by Gary P on Nov 27th 2017

    I ordered these sockets along with some led tubes in case I couldn't modify the existing sockets in my fixtures. The quality seems about standard to those purchased elsewhere. I have no way to compare them. I did use one to test my led tubes I purchased and the sockets worked smooth. They should work well.

  • 5
    Excellent product

    Posted by Tomgonzo on Sep 20th 2017

    Easy to install. Great price

SPECIAL OFFER